My club Evolution Jeep Alliance took a trip out to Colorado for two weeks of wheeling. This jack I had purchased at the All Breeds Jeep Show just for this trip. It ended up being the best investment I made. It was used to rebuild 3 axle shafts, diagnose a bad wheel sensor and rebuild two trailer wheel bearings. With onboard air and power tanks we lifted everything easily.
Advantage AL-12C | 12,000 lbs. 2 Post Lift
The Advantage AL-12C 12,000 lb. 2-post lift is perfect for lifting cars, SUV's, and trucks. This lift provides the lifting capacity needed for large trucks. Stack Adapters Included.
Flooring Requirements: Min. 5" thick concrete, free from cracks and seams, rated at 3,500+ psi
Ceiling Height Requirements: 12' Minimum
The Advantage 12,000 lbs. 2-Post Lifts are perfect for lifting cars, SUVs, trucks and high cargo vans.Shipping: FREE SHIPPING to closest trucking terminal for customer pickup OR pickup at 1 of our 8 warehouse locations:
- Wide Drive Through Between Posts
- 2-Stage Arms and 4.5” Pads
- Single Point Lock Release in Overhead
- Enhanced Strength Single Piece Column
- Stability “S” Column Design
- Screw-up Universal Pads
- Stack On Truck Adapters
- ETL Recognized 220V Power Unit
- 5 Year Warranty
- All mounting hardware is included: 5 1/2 x 3/4 Inch Lag Bolts (14)
- Minimum Ceiling Height Required: 12'
- Minimum 5 Inches of Concrete & 3500 PSI
Made with High Quality Steel
Our automotive lifts are produced with industrial grade steel. Providing you with the world-class quality, safety, & strength that we are known for.
Wide Column WidthWe designed our 2-Post lifts to be symmetrical to ensure our lifts offer the sturdiest and safest experience. To make it convenient to use, we've made sure the lifts have an adequate clearance to make it easy to get in and out of your vehicle.
Universal Foot PadOur 2-Post automotive lifts come equipped with polyurethane pads, perfect for lifting at pinch points and on body frames. These pads are universal and work with most vehicles, from small cars to large trucks.
Powder Coat FinishWe take pride in our products, and we think you'll like how it looks in your workspace. We make sure it looks great for years to come by protecting your lift with a vibrant powder coating.
Shipping/Receiving Your Lift
Shipping cost is based on the individual model. Costs are based on your
location. Ex. We do not ship to Hawaii, Puerto Rico, US military
installations or internationally.
There are multiple options for the delivery of your Advantage Lift.
Option 1: Pick up from one of our warehousing facilities. The available locations are:
-Inver Grove Heights, MN
-Park City, KS
Option 2: Have the lift shipped to a nearby truck terminal or commercial
address. In some markets residential delivery only is an option. Reach
out for more details on delivery only options.
Option 3: Have your lift delivered and installed at your location. If
your lift will be installed by Advantage Lifts or an installer within
our network, the customer service team will coordinate deliver with the
installer. There is no additional action needed on your part.
No. Removing the lift from the height of a tractor trailer without benefit of a receiving dock and forklift is unsafe.
We only ship to commercial
addresses with a receiving dock, and a forklift, or to a trucking terminal.
We recommend a 16’ + open car trailer for picking up a 4-post Advantage Lift.
We recommend a 12’ + open car trailer for a 2-post lift.
You can not load a lift into the bed of a pickup truck.
Yes, we have a network of installers nationwide. Call us for more installation
information, or a quote 763-300-5730.
Prices will vary based on quantity, and location. Plan on an average installation cost of $1200 per lift.
Yes, installation can be done by 1 individual, although we recommend using a lifting
device for the runways, and overall assembly usually works best with 2-3 people. The
installation is not complicated. The cables come pre-strung and the locking mechanism
is pre-assembled. The total number of parts requiring assembly are minimal.
We have heard from customers after they installed their lift that it was much easier than
expected! Be sure to view our installation videos
Advantage Lifts Installation Videos
We recommend you do not anchor Advantage 4-post lifts. Challenger 4P14 should be
4” concrete is the recommended thickness.